Shop our Black Friday Sale (11/23-27) on ProVetLogic Disinfectants and Kennel & Turf Care Products
Use Areas: Commercial Kennels, Animal Hospitals, Stables, Pet Grooming Shops, Animal Transport Vehicles, Zoos & Animal Parks, Poultry Farms, Pig Farms, Dairy Farms, Livestock Facilities
Here’s What’s On Sale:
Animal Facility Disinfectant – (4) 1 Gallon Bottles –
Animal Facility Disinfectant – 1 Gallon Bottle –
Animal Facility Disinfectant AcuPro Bottle 32 Ounce –
Kennel and Turf Care One Shot Enzymatic Floor Cleaner – 1/2 Gallon –
Kennel and Turf Care Enzymatic Floor Cleaner – 1 Gallon –
Kennel and Turf Care Enzymatic Floor Cleaner – (4) 1 Gallon Bottles –
What is Kennel Care by ProVetLogic?
Kennel Care by ProVetLogic is a high performance, bacterial-enriched floor cleaner, odor eliminator, organic waste degrader and floor drain maintainer. It is recommended for use on kennel floors, stable floors, interior and exterior run surfaces, small and large animal cages, grooming area floors and animal containment area floors. No rinse is required. The unique chemistry provides bleaching action (without the bleach) that brightens surfaces as it cleans and leaves surfaces sparkling clean with a pleasant scent.
Kennel Care is ideal for cleaning concrete, ceramic tile, quarry tile, grout, brick and rubber mats using either manual or mechanical methods. Inherent biological action continues to clean between regularly scheduled cleaning to help keep soil accumulations to a minimum.
Caution: Do not mix or use this product with acid, alkaline, or product containing bleach. For use on floor only. Do not use on food contact surfaces.
Kennel Care Floor Cleaning Directions
May be applied with mop, brush, pump-up sprayer, foam gun, pressure washer or automatic scrubber.
- For Light Duty Cleaning and Floor Maintaining: Dilute 1 to 2 ounces of product per gallon of water. No rinse required.
- For Medium Duty Cleaning: Dilute 3 to 4 ounces of product per gallon of water. Rinse thoroughly with clean water.
- For Heavy Duty Floor Cleaning: Dilute 6 to 8 ounces of product per gallon of water. Rinse thoroughly with clean water. Apply product by spray, mop, sponge or mechanical applicator to surfaces to be cleaned. If necessary, agitate to help remove excessive soils. Rinse thoroughly with clean water as needed.
These directions are flexible rather than specific. In many cases a more dilute solution can be used, while for extreme conditions a less dilute solution may be used.
Kennel Care Synthetic Turf Cleaning Instructions:
Remove and discard solid waste. In a pump sprayer or hose end sprayer apply the solution at a dilution rate of 2 to 4 ounces per gallon of water. Apply a liberal amount of solution to the surface. Agitate the surface to remove any visible stains. Allow the solution to stand for 3 to 5 minutes (no more than 5 minutes). Thoroughly rinse surface to allow the solution to penetrate in to the substrate material.
Directions for Treating Floor Drains with Kennel Care
For Daily Floor Drain Maintenance: At the end of the cleaning procedure, direct the emulsified solution to floor drains
using a rubber squeegee, synthetic brush or water pressure.
Caution: Do not use a floor brushes or brooms made with natural fibers, or wood handles as these will harbor harmful bacteria.
For the Treatment of Clogged Drains: Add 4 to 8 ounces of Kennel Care concentrate directly to the effected drain or drains and allow to sit overnight before rinsing with clean water. Repeat if necessary.
Kennel and Turf Care One Shot Enzymatic Floor Cleaner has a Hose End Applicator to Make Cleaning Easy
Easy to Use on Turf
Remove and discard solid waste. Turn the spray setting to the chemical feed position. Working from the furthest section of the turf area and moving backwards, apply the solution to the surface. Allow the solution to sit for 3 to 5 minutes. Turn the spray setting to the rinse position. Moving towards the starting point and holding the sprayer 12 to 24 inches from the surface, thoroughly rinse the turf.
Easy to Use on Floors with Drains and Outdoor Surfaces
Remove and discard solid waste. Turn the spray setting to the chemical feed position. Apply the solution to the surface. If needed, agitate the surface using a deck brush to remove excess soil. Allow the solution to sit for 3 to 5 minutes. Turn the spray setting to the rinse position. Thoroughly rinse the surface.
Pet Safety: It is safe to return the pet to the surface if there are no standing puddles or heavy moisture. A damp surface will not harm the pet.
Click the links below for more information and instructions for Kennel and Turf Care Products:
Kennel and Turf Care for Pet Stains and Odor Restoration
Turf Cleaning Protocol with the V97 ProFoam 2 Foam Gun
Kennel and Turf Care Product Details and Catalog