Product: HP 100 General Purpose Grade Hot Melt Packaging Tape – Clear 48 mm × 100 m

HP 100 is a general purpose grade, light duty packaging tape designed to provide an instant, permanent bond to a wide range of substrates and surfaces. Engineered with a special release coating for Good to the Core® performance, it ensures a consistent, low-force unwind off the roll. Featuring a high-tack synthetic rubber/resin hot melt adhesive with Hold Strong® technology, this tape delivers a long-lasting, secure seal for reliable packaging performance.

Specifications:
Learn more about HP 100 in depth by exploring all of its features and uses. You can also visit TapeUniversity.com to learn more about choosing and using tapes.

Markets:
Packaging Solutions – Automated Carton Sealing, Transportation – Automotive Aftermarket, Packaging Solutions – Carton Sealing, Building & Construction – General Construction, Transportation – General Transportation, Specialty – Made in USA, Packaging Solutions – Manual Carton Sealing, Converting – Packaging Tape

Construction:
Backing: 25 micron cast biaxially oriented polypropylene film
Adhesive: Synthetic rubber/resin hot melt adhesive
Liner: NA

Properties & Technical Data:
Product Nomenclature: HP 100
Adhesion to Backing – Hand Rolls Only: 18 oz/in width | 1.97 N/10 mm
Adhesion to Backing – Machine Rolls Only: 4 oz/in width | 0.44 N/10 mm
Adhesion to Stainless Steel: 43 oz/in width | 4.71 N/10 mm
Application Temperature Range: 35°F to 110°F | 2°C to 43°C
Elongation: 150% | 150%
Holding Power to Fiberboard: 10,000 minutes | 10,000 minutes
Service Temperature Range: -20°F to 150°F | -29°C to 66°C
Tensile Strength – Longitudinal Direction: 21 lbs/in width | 36.8 N/10 mm
Tensile Strength – Transverse Direction: 36 lbs/in width | 63.0 N/10 mm
Thickness: 1.6 mils | 0.041 mm
Physical and performance characteristics shown above are obtained from tests recommended by PSTC, ASTM, government agencies or Shurtape Technologies, LLC, Quality Assurance and Technical Service departments and do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user’s method of application before use.

Downloads:

• Technical Data Sheet
• Safety Data Sheet
• Regulatory Compliance Letter
• Sales Sheet
•  Infographic
• Automotive Aftermarket Pro Guide
• Packaging Tape Pro Guide

Sizes & Colors:
Colors Available: Tan (TAN), Clear (CLR)
Lengths Available: 54.6 yd, 109.3 yd, 1000 yd, 1500 yd, 1640.4 yd, 2000 yd
Widths Available: 1.88 in, 2.08 in, 2.83 in
Sizes and colors disclaimer: Lead times may apply. Please contact Shurtape customer service for information related to stock and non-stock sizes and colors.

Storage & Usage Conditions:
Tape should be stored in its original packaging in a cool, dry area away from direct sunlight and should be used within 12 months of date of shipment. Surfaces to which tape is applied should be clean, dry and free of grease, oil or other contaminants.

Applicable Standards:
CID A-A-1684C
FDA Indirect Contact CFR 21, 175.105