High Solids, High Gloss Finish

Directions

Application:

1. Strip floors to remove old waxes, sealers and finishes.
2. Rinse thoroughly and let dry.
3. With clean rayon mop apply thin, even coats of Pureshine 25.
4. Under normal conditions, allow to dry for 30 to 40 minutes between coats.
5. For best results, apply a maximum of 3 coats in 24 hours.

Maintenance:

1. Daily: Sweep or dust mop as necessary to remove gritty soil.
2. Dirty Floors: Clean with 2-4 oz. of Nu-Tral Cleaner(507FC) per gallon of water. Rinse and let dry.
3. Traffic Area: Clean with 2-4 oz. of Nu-Tral Cleaner(507FC) per gallon of water. Rinse and let dry. Apply additional thin coats of floor finish to traffic lanes as needed.
4. Buffing: If desired, periodic burnishing with semi-soft blended pads will enhance appearance.
5. Periodic Complete Maintenance: Ordinarily, stripping is not required more than (1) or (2) times per year. Use up to 32 ozs. of our stripper per gallon of water.

See label directions and SDS for complete usage and safety instructions.

Application

• Pureshine 25 is easy to apply with a standard finish mop and dries perfectly clear.
• For best results, apply three coats the first night, then follow-up a few days later with three more coats. This gives you the desired film thickness from which to properly maintain your floor.

Pads

.	Propane	Battery	Electric (1000+ rpm)
3M	Natural Blend White	Natural Blend White	Tan Burnish
Americo	Combo	Porko Elite	Porko Elite
ETC	Jaguar	Jaguar	Jaguar
Glit	Blue Ice	Blue Ice	Blue Ice
Microtron	Beige -or- Blue Ice	Beige	VL Natural Fiber
Norton	Grizzly Bear “Lite”	Grizzly Bear “Lite”	Grizzly Bear “Lite”

* These are generalized classifications based on market research. Terms and definitions may be different from manufacturer to manufacturer; however, the above information will help to determine pad compatibility with various floor machines and Essential finishes on the market.