Product: Point Guard Fast-Drying Water-Based Floor Seal – Urethane/Acrylic Blend for New or Newly Sanded Wood Floors, 2.5 Gal Bottle

Point Guard Fast-Drying Water-Based Floor Seal is designed for new or newly sanded wood floors. It features a fast-build formulation and rich amber color that easily abrades smooth with maroon floor pads. Additional features include suitability for gym floors, racquetball courts, dance floors, and other wood surfaces. The product is fast-drying within 60 minutes under normal conditions and dramatically reduces the risk of sidebonding. Coverage is up to 600 sq. ft. per gallon.

Properties:
Type – Urethane/Acrylic Blend
Form – Opaque Liquid
Odor – Bland
Color – Off-White
Weight per Gallon – 8.73 Lbs.
pH – 7.5 – 8.5
Floor Solids – 30%
Storage Stability – Up To 1 Year, Unopened
Freeze/Thaw – Passes 3 Cycles
V.O.C. – 164 gm/l

Directions:
Initial Preparation:
Never apply Point Guard to a floor that has been chemically stripped.

Wood Preparation:
Sand floor using appropriate procedures and remove all old coatings or wax. Finish sanding with a new 120-grit screen. Do not use steel wool. Vacuum all dust and tack with clean, water-dampened towels or microfiber pads that have been tightly wrung out. Tack until all dust has been removed. Allow floor to dry until there is no sign of moisture.

Seal Application (Use on any new or newly sanded floors):
Check moisture content of wood. It should be 10% or less before sealing. Apply seal with a weighted T-bar. Allow the first coat to dry 1 hour (longer under high humidity). Recheck floor with a moisture meter; if higher than starting point, allow more dry time. Screening is not necessary if recoated in less than 48 hours. If screening is desired, use 150–220 grit sanding screens. Tack until all dust has been removed with clean, water-dampened towels or microfiber pads that are tightly wrung out. Apply second coat of seal using a weighted T-bar. Allow 12 or more hours of cure time. Repeat steps 4–5.

If desired, paint game lines using high-quality 100% acrylic latex paint. Allow 24 hours of cure time, then properly abrade before applying top coats. Apply 3 coats of Sport Kote PC® (128SF) or Satin Sport Kote (228SF). If any grain raising is noticed between coats of Sport Kote, buff the floor smooth with a maroon pad and tack.

Coverage:
One gallon covers approximately 450–600 square feet (One liter covers 11–15 m²).