For information and quotes, Call us today at 502-382-8320

Product: X-Coat 22 Floor Finish

X-Coat 22 Floor Finish


SKU: ES-265FF-GR4-PARENTCategories: ,

More about this product

More about this product

X-Coat™ 22

High Solids Extreme Performance Coating

  • Combines deep gloss, high durability and ease-of-use into one product.
  • High solids formula offers greater protection with fewer coats.
  • Non-yellowing, low maintenance formula offers excellent black mark and scuff resistance
  • Perfect for classrooms, patient rooms, offices and retail establishments.
  • Ideal for limited maintenance programs, yet responds to daily burnishing, if desired.
  • Fast drying – 30 minutes under normal conditions.
  • Use on vinyl, rubber, linoleum, terrazzo, quarry tile and sealed concrete floors.
  • Slip-resistant – UL Classified.


Type   Acrylic Emulsion
Form   Opaque Liquid
Odor   Bland
Color   Milky White
Weight per Gallon   8.61 Lbs.
pH  8-8.5
Floor Solids  22%
Coverage   Up to 3,000 Sq. Ft. Per Gallon (75 m2 per liter)
Storage Stability   Min. 1 Year
Freeze/Thaw   Passes 3 Cycles
V.O.C. Content   < 230 gm/l

* Properties are typical and subject to usual manufacturing tolerances.



  1. Strip floors to remove old waxes, sealers and finishes.
  2. Rinse thoroughly and let dry.
  3. With clean rayon mop apply thin, even coats of X-Coat 22.
  4. Under normal conditions, allow to dry for 30 minutes between coats.
  5. For best results, apply a maximum of 4 coats in 24 hours.


  1. Daily: Sweep or dust mop as necessary to remove gritty soil.
  2. Dirty Floors: Clean with 2-4 oz. of Nu-Tral Cleaner(507FC) per gallon of water. Rinse and let dry.
  3. Traffic Area: Clean with 2-4 oz. of Nu-Tral Cleaner(507FC) per gallon of water. Rinse and let dry. Apply additional thin coats of floor finish to traffic lanes as needed.
  4. Buffing: If desired, periodic burnishing with blended hair pads will enhance appearance.
  5. Periodic Complete Maintenance: Ordinarily, stripping is not required more than (1) or (2) times per year. Use up to 32 ozs. of our stripper per gallon of water.

See label directions and SDS for complete usage and safety instructions.

 WARNING: Reproductive Harm –


  • X-Coat 22 is very easy to apply with a standard finish mop and dries perfectly clear.
  • For best results in high traffic locations (such as supermarkets) and entranceways, apply four coats the first night, then follow-up a few days later with four more coats. This gives you the desired film thickness from which to properly maintain your floor.


. Propane Battery Electric (1000+ rpm)
3M Natural Blend White Natural Blend White Tan Burnish
Americo Combo Luster Lite Beige
ETC Gorilla Lite Aqua PLUS Aqua PLUS
Glit 100-D Neutral
100-D Neutral
100-D Neutral
Microtron Jackeroo Lite Beige Beige
Norton Grizzly Bear “Lite” Thermal Thermal

* These are generalized classifications based on market research. Terms and definitions may be different from manufacturer to manufacturer; however, the above information will help to determine pad compatibility with various floor machines and Essential finishes on the market.

Related products

Customer Reviews


There are no reviews yet.

Be the first to review “X-Coat 22 Floor Finish”

Your email address will not be published.


Go to Top