Free Shipping on All Machines

View Products

Durabrite Low Maintenance Floor Finish – 1 Gal

$21.16

Low Maintenance Finish

  • Extremely durable and mark-resistant finish for low maintenance applications.
  • High gloss acrylic polymers stay clean, clear, and shiny to reduce maintenance.
  • Non-yellowing, low maintenance formula offers superb black mark and scuff resistance.

Application

  • Durabrite is very easy to apply with a standard finish mop and dries perfectly clear.
  • For best results in high traffic locations (such as supermarkets) and entranceways, apply four coats the first night, then follow-up a few days later with four more coats. This gives you the desired film thickness from which to properly maintain your floor.
  • Durabrite is a fast curing (~2 hours) finish and therefore is ideal for areas where traffic is heavy just after application. It is also ideal for application to newly installed VCT floors.

Product Sheets

Safety Data Sheet – PDF

Safety Data Sheet (Spanish) – PDF

Safety Data Sheet (French) – PDF

Product Sheet – PDF

SKU: ES-253FF-GR4Categories: ,

Customer Reviews

More about this product

More about this product

Durabrite®

Low Maintenance Finish

  • Extremely durable and mark-resistant finish for low maintenance applications.
  • High gloss acrylic polymers stay clean, clear, and shiny to reduce maintenance.
  • Non-yellowing, low maintenance formula offers superb black mark and scuff resistance.
  • Ideal for reduced burnishing programs (once per week).
  • Use on vinyl tile, rubber, linoleum, terrazzo and quarry tile floors.
  • Excellent seal properties.

Properties

  • Type – Metal Interlock Acrylic
  • Form – Opaque Liquid
  • Odor – Bland
  • Color – Milky White
  • Weight per Gallon – 8.60 Lbs.
  • pH – 8.1-8.3
  • Floor Solids – 18%
  • Coverage – Up to 3,000 Sq. Ft. Per Gallon (75 m2 per liter)
  • Dry Time – 30 Minutes
  • Slip-Resistance – UL Classified
  • V.O.C. Content – < 260 gm/l

* Properties are typical and subject to usual manufacturing tolerances.

Directions

Application:

  1. Strip floors to remove old waxes, sealers and finishes.
  2. Rinse thoroughly and let dry.
  3. With clean rayon mop apply thin, even coats of Durabrite.
  4. Under normal conditions, allow to dry for 30 minutes between coats.
  5. For best results, apply a maximum of 4 coats in 24 hours.

Maintenance:

  1. Daily: Sweep or dust mop as necessary to remove gritty soil.
  2. Dirty Floors: Clean with 2-4 oz. of Blue Concentrate SC per gallon of water. Rinse and let dry.
  3. Traffic Area: Clean with 2-4 oz. of Blue Concentrate SC per gallon of water. Rinse and let dry. Apply additional thin coats of floor finish to traffic lanes as needed.
  4. Buffing: If desired, periodic burnishing with blended hair pads will enhance appearance.
  5. Periodic Complete Maintenance: Ordinarily, stripping is not required more than (1) or (2) times per year. Use up to 32 ozs. of our stripper per gallon of water.

See label directions and SDS for complete usage and safety instructions.

Application

  • Durabrite is very easy to apply with a standard finish mop and dries perfectly clear.
  • For best results in high traffic locations (such as supermarkets) and entranceways, apply four coats the first night, then follow-up a few days later with four more coats. This gives you the desired film thickness from which to properly maintain your floor.
  • Durabrite is a fast curing (~2 hours) finish and therefore is ideal for areas where traffic is heavy just after application. It is also ideal for application to newly installed VCT floors.

Pads

. Propane Battery Electric (1000+ rpm)
3M Tan Burnish Tan Burnish Tan Burnish
Americo Combo Combo Porko Elite
ETC Gorilla Gorilla Gorilla
Glit Jackeroo Jackeroo Jackeroo
Microtron PL Natural Poly PL Natural Poly PL Natural Poly
Norton Grizzly Bear “Lite” Grizzly Bear Grizzly Bear

* These are generalized classifications based on market research. Terms and definitions may be different from manufacturer to manufacturer; however, the above information will help to determine pad compatibility with various floor machines and Essential finishes on the market.

  • Use code SAVE5 to save 5% on your first online order!

    *Please note that this excludes machines (which all include free shipping).